Please wait

This is taking a little longer than expected

text.skipToContent text.skipToNavigation
You have exceeded the number of times to successfully log in to your myUFA account. For your security, access to your myUFA account is locked. In order to access your myUFA account, please contact Customer Support 1-877-258-4500.
Heat Cable Tape - 24-ft
MODEL #AHB-124 | SKU #18741
Set preferred store
The EasyHeat™ AHB Cable is a pre-assembled, ready-to-install electric water pipe heating cable designed to prevent metal and plastic pipes from freezing. It features an integral energy-saving thermostat that activates and deactivates the cable based on ambient temperature. This ensures efficient operation and protection for commercial and residential metal or plastic water supply pipes.
  • Keeps water flowing at ambient temperatures down to –40°F (–40°C)
  • Cables are rated at 7 Watts per foot (0.30 m)
  • Built-in thermostat turns on at +38°F (+3°C) or below and turns off at +45°F (+7°C) and above
  • Plugs into a standard 120 Vac outlet, must be GFCI protected
  • Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket
  • Integral thermostat saves energy by powering the cable only when needed
Specifications
Size more than 20'
Type Heat Tape
Technology Fp01b
Length 10.30 in
Width 10.00 in
Height 0.70 in
Net Weight 1.10 lb
Gross Weight 1.10 lb
Volume 72.10 cu in
Write a Review
0 Reviews