text.skipToContent text.skipToNavigation

Set preferred store >

Shop
Shop
  1. Home
  2. Building Supplies
  3. Tools & Equipment
  4. Power Tools
  5. Drill Accessories
  6. HSS 6542 Black Oxide Drill Bit with 1/2" Straight Shank
You have exceeded the number of times to successfully log in to your myUFA account. For your security, access to your myUFA account is locked. In order to access your myUFA account, please contact Customer Support 1-877-258-4500.
uxcell
HSS 6542 Black Oxide Drill Bit with 1/2" Straight Shank
MODEL #s24011800wm2879 | SKU #mp-00019580
Write a Review
Select location to view pricing
Product Information
High Speed Steel tool - 17mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistanceReduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changesBlack Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edgeWide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metalPlease Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
  • cutting diameter: 17mm / 0.67"
  • shank diameter: 1/2"
  • cutting edge length: 80mm / 3.15"
  • overall length: 150mm / 6.0"
  • material: high speed steel 6542 (hss 6542)
  • finish type: black oxide, nitriding
  • shank type: round shank
  • tool flute type: spiral
  • hardened to: 65-66 hrc
  • 1. High-speed steel tool is good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
  • 2. Reduced shank drill expand the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
  • 3. Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • 4. Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal.
  • 5. Running in a counterclockwise direction (right-hand cut), spiral fluted tool evacuates chips up and out of the cut to reduce clogging.
  • package: 1 x reduced shank drill bit
  • use note: 1. To make clean and precise holes, water is required for lubrication and cooling when drilling metals.
  • 2. Low drill pressure and increased use of water lubrication will extend drill bit life.
Specifications
Specifications
Length 5.91 in
Width 5.91 in
Height 0.79 in
Net Weight 0.37 lb
Gross Weight 0.37 lb
Volume 27.48 cu in
Write a Review
0 Reviews