text.skipToContent text.skipToNavigation

Set preferred store >

Shop
Shop
  1. Home
  2. Building Supplies
  3. Tools & Equipment
  4. Power Tools
  5. Drill Accessories
  6. HSS Reduced Shank Drill Bit with 1/2-Inch Shank
You have exceeded the number of times to successfully log in to your myUFA account. For your security, access to your myUFA account is locked. In order to access your myUFA account, please contact Customer Support 1-877-258-4500.
SALE
SALE
SALE
SALE
SALE
SALE
uxcell
HSS Reduced Shank Drill Bit with 1/2-Inch Shank
MODEL #s24011800wm2913 | SKU #mp-00019514
Write a Review
CA$17.99 CA$23.99

SAVE 25%

6  
in stock online only
Sold and shipped by Tasharina Corp
Shipping from CA$0.00
Return and Shipping Policy
Shipping charges on returns may apply.
Delivery times vary by location. Most marketplace items leave vendor's locations within 5 business days.
Product Information
High Speed Steel tool - 24mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance. Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Polished Finish - Polished treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge. Wide Application - Drill low and medium tensile strength materials, such aluminum, iron, copper, brass and metal. Reduced shank drill bit is widely suitable for wood processing. (Hardness of the material to be drilled should not exceed 29HRC.) Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals, and the feed speed should be controlled. Increased use of water lubrication will extend drill bit life.
  • cutting diameter: 24mm / 0.94"
  • shank diameter: 1/2"
  • cutting edge length: 83mm / 3.27"
  • effective cutting edge length: 66mm / 2.6"
  • overall length: 150mm / 6.0"
  • material : high speed steel 4241 (hss 4241)
  • finish type: polished
  • shank type: round shank
  • tool flute type: spiral
  • hardened to: 62-63 hrc
  • color: silver tone
  • reduced shank drill expand the size range capacity of a portable drill chuck.
  • common flute and overall length for minimal adjustment during tool changes.
  • polished treatment adds lubricity.
  • small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal. Reduced shank drill bit is widely suitable for wood processing (hardness of the material to be drilled should not exceed 29hrc.)
  • running in a counterclockwise direction (right-hand cut), spiral fluted tool evacuates chips up and out of the cut to reduce clogging.
  • package: 1 x reduced shank drill bit
  • use note: to make clean and precise holes, water is required for lubrication and cooling when drilling metals. The feed speed also should be controlled.
  • low drill pressure and increased use of water lubrication will extend drill bit life.
Specifications
Specifications
Length 5.91 in
Width 0.94 in
Height 1.18 in
Net Weight 0.55 lb
Gross Weight 0.55 lb
Volume 6.56 cu in
Write a Review
0 Reviews